The purpose of these design cylinders are to establish and verity the compression strength of OmniBond concrete based on various concentrations of chemicals and sand to cement ratios. The results will be generated into a computer program to determine the design strengths for our post and Beam wall system. All of the following concrete samples were manufactured from the same supply of materials including the OmniBond, water, sand and Lafarge Type I Portland Cement, (refer to mill Grind Reports).

All samples were mixed based on volume proportions or parts, where 1 part liquid was mixed with 2 parts Portland Cement. The two variables were the concentration of OmniBond Chemicals and the Sand to Cement Ratio. As a control, samples 1 - 4 were manufactured with potable Water, local sand, and Lafarge concrete and did not feature the use of OmniBond chemicals and is denoted in the graph below as zero.

The A samples of each type were tested after 7 days for compressive strength, Samples B, C, D were then tested at 28 days to determine final design strength.

SAMPLE		OmniBOND TO WATER RATIO		LIQUID		CEMENT		SAND		CEMENT SAND RATIO
1 A,B,C,D		zero		1 part		2 parts		zero		1 TO 0
2 A,B,C,D		zero		1 part		2 parts		2 parts		1 TO 1
3 A,B,C,D		zero		1 part		2 parts		4 parts		1 TO 2
4 A,B,C,D		zero		1 part		2 parts		6 parts		1 TO 3
5 A,B,C,D		1 bag to 1 gallon		1 part		2 parts		zero		1 TO 0
6 A,B,C,D		1 bag to 1 gallon		1 part		2 parts		2 parts		1 TO 1
7 A,B,C,D		1 bag to 1 gallon		1 part		2 parts		4 parts		1 TO 2
8 A,B,C,D		1 bag to 1 gallon		1 part		2 parts		6 parts		1 TO 3
9 A,B,C,D		1 bag to 1.5 gallons		1 part		2 parts		zero		1 TO 0
10 A,B,C,D		1 bag to 1.5 gallons		1 part		2 parts		2 parts		1 TO 1
11 A,B,C,D		1 bag to 1.5 gallons		1 part		2 parts		4 parts		1 T0 2
12 A,B,C,D		1 bag to 1.5 gallons		1 part		2 parts		6 parts		1 TO 3
13 A,B,C,D		1 bag to 2 gallons		1 part		2 parts		zero		1 TO 0
14 A,B,C,D		1 bag to 2 gallons		1 part		2 parts		2 parts		1 TO 1
15 A,B,C,D		1 bag to 2 gallons		1 part		2 parts		4 parts		1 TO 2
16 A,B,C,D		1 bag to 2 gallons		1 part		2 parts		6 parts		1 TO 3
17 A,B,C,D		1 bag to 2.5 gallons		1 part		2 parts		zero		1 TO 0
18 A,B,C,D		1 bag to 2.5 gallons		1 part		2 parts		2 parts		1 TO 1
19 A,B,C,D		1 bag to 2.5 gallons		1 part		2 parts		4 parts		1 TO 2
20 A,B,C,D		1 bag to 2.5 gallons		1 part		2 parts		6 parts		1 TO 3
21 A,B,C,D		1 bag to 3 gallons		1 part		2 parts		zero		1 TO 0
22 A,B,C,D		1 bag to 3 gallons		1 part		2 parts		2 parts		1 T0 1
23 A,B,C,D		1 bag to 3 gallons		1 part		2 parts		4 parts		1 TO 2
24 A,B,C,D		1 bag to 3 gallons		1 part		2 parts		6 parts		1 TO 3

1 part liquid = 1 gallon OmniBond liquid

OmniBOND MIXES
RATIO

MIX NO.		OmniBOND D:W RATIO		OmniBOND C:S RATIO		7 DAY PSI		14 DAY PSI		28 DAY PSI		28 DAY PSI		AVERAGE PSI
No.1		0 to 1		2 to 0		4990		7190		7410		7750		7580*
No.2		0 to 1		2 to 2		5680		6580		7360		7580		7470*
No.3		0 to 1		2 to 4		4820		4970		6250		6350		6300*
No.4		0 to 1		2 to 6		4270		4360		4990		4840		4915*
No.5		1 to 1		2 to 0		5780		7990		7980		7880		7930
No.6		1 to 1		2 to 2		5800		6060		6580		6680		6630
No.7		1 to 1		2 to 4		3480		3700		4080		4250		4155
No.8		1 to 1		2 to 6		4130		4220		4820		5120		4970
No.9		1 to 1.5		2 to 0		6410		7460		8020		8460		8240
No.10		1 to 1.5		2 to 2		6100		7020		7980		7900		7940
No.11		1 to 1.5		2 to 4		4150		4260		5420		5390		5405
No.12		1 to 1.5		2 to 6		3570		3620		4470		4360		4415
No.13		1 to 2		2 to 0		8750		7720		7820		9850		8735
No.14		1 to 2		2 to 2		7650		8050		9220		8770		8995
No.15		1 to 2		2 to 4		7120		7330		7750		7790		7770
No.16		1 to 2		2 to 6		5190		5460		5530		5390		5460
No.17		1 to 2.5		2 to 0		7160		8300		9280		9210		9245
No.18		1 to 2.5		2 to 2		5810		5760		6950		7120		7035
No.19		1 to 2.5		2 to 4		4580		5120		6100		6130		6115
No.20		1 to 2.5		2 to 6		3700		6680		8970		9240		5105
No.21		1 to 3		2 to 0		5220		6680		8970		9240		9105
No.22		1 to 3		2 to 2		6340		6590		8660		8540		8600
No.23		1 to 3		2 to 4		5710		5890		6910		6500		6705
No.24		1 to 3		2 to6		3930		4020		4360		4270		4315

*Note: Mix 1 to 4 has poor adhesion quality. These mixes do not adhere to EPS